Each module consists of 2 receive/transmit channels, each of which is connected to the antenna at the RF end of the transmit channel, as shown in the diagram. The module must be equipped with power fault status reporting, temperature detection reporting, lockout indication reporting, etc.
No. | Parameters | Limit values | Unit | Remarks | ||
Min. value | Max. value | |||||
1 | Launch Parameters | Channel Gain | 40 | 42 | dB | Attenuator set |
2 | Transmitting power | 33 | - | dBm | Single Channel | |
3 | Transmit signal bandwidth | 300 | - | MHz | ||
4 | Two-way IF amplitude imbalance degree | -0.35 | 0.35 | dB | ||
5 | Output pulse width | 60 | 80 | Ns | ||
6 | 0/π phase-modulator carrier frequency suppression system | 25 | dB | |||
7 | Phase conversion speed | 20 | ns | |||
8 | Phase error | 10 | ° | |||
9 | AM speed | 3 | ns | |||
10 | Modulation depth | 85 | dBc | |||
11 | Stray suppression | 60 | - | dBc | ||
12 | Total power consumption | - | 40 | W | With acceptance | |
13 | Channel Gain | 50 | dB | |||
14 | Noise factor NF | - | 9 | dB | Full temperature | |
15 | Input anti-burn-in | 1 | - | W | ||
16 | Input 1dB compression point P-1IN | -15 | - | dBm | ||
17 | Output IF limit level | 9.5 | dBm | |||
18 | Receiving Parameters | Two-way IF amplitude imbalance degree | -0.25 | 0.25 | dB | |
19 | Mirror Suppression | 18 | dB | |||
20 | Stray suppression | 60 | - | dBc |