The C-band uplink signal received by the antenna is amplified, filtered and sent to the uplink receiving equipment; the downlink signal is filtered, amplified and sent to the antenna to transmit to the ground; the signals of the transmitting and receiving channels are isolated by a duplexer, and the three antennas are switched on in time by an RF switch.
The default state of the C downlink RF channel after power up is low power, working state, level output 20dBm~25dBm (downlink RF port 0dBm input), the RF channel after power up is connected to the C roof omnidirectional antenna by default.
No. | Parameters | Indicator Requirements |
1 | Receiving channel operating frequency | XX00MHz ~ XX50MHz |
2 | Receiving noise factor | Omnidirectional antenna 1, 2 ≤ 3.5dB |
Directional antenna ≤ 3.2dB | ||
3 | Anti-burnout capability | ≥ 30dBm |
4 | Receiving channel gain | 38±2dB |
7 | Receive in-band fluctuations | ≤±1dB |
8 | Receive output P-1 | ≥ 10dBm |
9 | Receive channel suppression of transmit channel | ≥ 100dB |
10 | Transmitting channel operating frequency | XX50MHz ~ XX50MHz |
11 | Transmitting output power | ≥46dBm |
12 | Output third-order intermodulation | ≤ -25dBc |
13 | Power amplifier with | Work/silent function |
14 | Power amplifier with | High/Low power control function; the output power 20dBm ~ 25dBm ≥ 32dBm in s |
15 | Controllable attenuation amount | 0 ~60dB |
16 | Power on default low power | Omnidirectional antenna 1 working |
17 | Launch channel in-band fluctuations | ≤±1dB |
18 | Transmit channel suppression of the receive channel | ≥90dB |
19 | Power consumption | ≤220W |