The down-converter module receives 30MHz ~ 3GHz RF signals mixed and filtered to amplify the output 720MHz/140MHz, its main function is to complete the function of the input signal to the IF signal.
No. | Parameters | Indicator Requirements | |
1 | Input signal frequency | 30MHz~3GHz | |
2 | Noise factor | ≤8dB (room temperature) | |
3 | Tuning Resolution | ≤ 1kHz | |
4 | Maximum input power | +10dBm | |
5 | Output Medium Frequency Characteristics | IF 1: Center frequency 720MHz | Bandwidth 1:250MHz, Ripple in BW ≤3.5dB (+25℃), rectangular coefficient (55dB:3dB) ≤2.0 |
Bandwidth 2:60MHz, Ripple in BW ≤±3dB (+25℃), rectangular coefficient (55dB:3dB) ≤2.0 | |||
IF 2:Center frequency 140MHz | Bandwidth 1:72MHz, Ripple in BW ≤2.5dB (+25℃), rectangular coefficient (60dB:3dB) ≤1.6 | ||
Bandwidth 2:36MHz, Ripple in BW ≤2.5dB (+25℃), rectangular coefficient (60dB:3dB) ≤2.0 | |||
Bandwidth 3:2MHz, Ripple in BW ≤2.5dB (+25℃), rectangular coefficient (45dB:3dB) ≤3.0 | |||
Bandwidth 4:500kHz,Ripple in BW ≤ 2.5dB (+25℃), rectangular coefficient (45dB:3dB) ≤ 3.2 | |||
6 | Signal Gain | 50dB ±2dB(+25℃) | |
6 | Signal attenuation | ≥50dB, 1dB step(RF 30dB, IF 20dB) | |
8 | Output signal P-1 | ≥+15dBm(+25℃) | |
9 | Second order intercept point | ≥ 50dBm (+25℃, Δf=2 times the maximum bandwidth, At 20dB front attenuation) | |
10 | Input out-of-band third-order intercept point | ≥ 10dBm (room temperature, Δf=2 times the maximum bandwidth) | |
11 | Medium frequency suppression | ≥90dB(typical) | |
12 | Mirror frequency suppression | ≥90dB(typical) | |
13 | False Signals | ≤ -100dBm (maximum gain folded to input) | |
14 | Cavity isolation degree | ≤ -100dBm (maximum gain folded to the input, antenna placed vertically , distance 10cm , signal source 0dBm transmit , RF port end connected load) | |
15 | Phase noise | ≤ -100dBc@10kHz(input frequency 1GHz) | |
16 | Frequency Accuracy | ≤±0.2ppm | |
17 | Power consumption | ≤ 15W |