The receiver channel of this component amplifies the incoming RF signal, sorts the filter and detects it. The receiver channel of the assembly amplifies the incoming RF signal, sorts it into filter groups, detects the waveform and, after a secondary down-conversion, achieves an IF output. The transmitter channel takes the incoming IF signal, up-converts it twice and then passes it through a binning filter bank and amplifies it. The RF output is achieved.
No. | Parameters | Test index | Unit |
1 | Operating Frequency Band | 2~18 | GHz |
2 | Instantaneous bandwidth | ≥2 | GHz |
3 | Reception sensitivity | Better than -60 | dBm |
4 | Receiving dynamic range | Greater than 60 | dB |
5 | Anti-burnout power | Not less than 30 | dBm |
6 | IF frequency | 0.25~2.25 | GHz |
7 | Medium frequency output power | ≤-2 | dBm |
8 | Medium frequency maximum input power | 0 ± 1 | dBm |
9 | Transmitting output power | 7 ±2 | dBm |
10 | stray | ≤-35 | dBc |
11 | Supply voltage | ±6, +13 | V |